Infineon

Lowongan Infineon Technologies Batam



Fresh Graduate

1. System Engineer




2. Technician




3. FI (Factory Integration) Engineer




Experienced

1. Senior Process Engineer




2. Senior Engineer Test Equipment




3. EOL Equipment Engineer




NOTE !!!

1. Tes Tulis akan dilaksanakan hanya bagi peserta yang dinyatakan lolos administrasi, tes akan dilaksanakan di Ruang Teater Gedung D3, Politeknik Elektronika Negeri Surabaya, Jl. Raya ITS Sukolilo Surabaya pada tanggal 31 Januari 2019 s/d 1 Februari 2019 pukul 08.00 WIB

2. Setelah melamar posisi yang diinginkan, harap konfirmasi kehadiran ke no 087854130104

Pilihan Posisi



#Posisi sebagai : System Engineer

Job description

In your new role you will:

• Manage overall WP Client Services operation i.e. manage the overall support for 2nd & 3rd Level incidents, service orders and problem management of WP services.

• IT client Assets management and internal audit.

• Ensure that daily operations are running in a stable and high performance level as per OLA (Operation Level Agreement)

• Oversee Remedy system tickets and manage user escalation.

• Client security control and prevention actions in patch management and virus protection especially in FAB area.

• Involvement in IT infrastructure projects.

• Provide technical advice or assistance whenever required.

• Maintain team motivation with good communications channel (team gathering, meetings, etc.)

• Drive continuous improvement initiatives within workplace automation (WP AH) operations support area (e.g automation & solving).



Your profile

You are best equipped for this task if you have:

• Bachelors degree in a technical discipline (Computer Engineering, Computer Science, or related discipline)

• Fresh graduates are welcome to apply.

• Familiarity with ITIL (IT Infrastructure Library) processes and Remedy.

• Good communication and interpersonal skills; able to work in a team.

• Able to work independently with minimal supervision, willing to learn and work hard.

• Good proficiency in English.


#Posisi sebagai : Technician

Job description 

In your new role you will: 

- Perform set up and repair equipment

- Perform machine conversion, calibration, troubleshooting

- Minimize unscheduled downtime



Your profile 

You are best equipped for this task if you have: 

- D3 in Electronics, Mechatronics, Mechanical, Electrical (fresh graduate is welcome)

- Good Communication

- Quick Learner




#Posisi sebagai : FI (Factory Integration) Engineer

Job description

In your new role you will:

• Improve the manufacturing Performance including shop floor operation optimization.

• Coordinate with cross functionally to execute and implement the new projects .

• Recommends a solution for issues related to Automation in Factory Integration and coordinate with Application Owner for improvement.

• Mentor for issues of new factory Integration Application release.

• Maintain application release and support production line disturbance.

• Comfortable with multi tasks and timeline.

• Provide weekly and monthly report for Global Function Team (Asia-Pacific)



Your profile

You are best equipped for this task if you have:

• Bachelors or Master in Automation Engineering, Electronics Engineering, IT / Computer science and computer engineering.

• Fresh Graduates is welcome.

• Understand Factory Automation concept and Architecture.

• Good In electronics principle and in computer included Microsoft skill: Power Point, Excel, Word, Access.

• Knowledge in C/C++, SAP Programming, Oracle Database, Perl will be added advantage.

• Strong communication skills in English (written and verbal), relationship building, organizational, technical problem solving, and ability to regularly interact with staff from other

functions.



#Posisi sebagai : Senior Process Engineer

Job description

In your new role you will:

• Responsible for Process improvement and sustaining in term of yield, quality and productivity at mold/TF process for DSO 150 mils package platform.

• Responsibility :

◦ Yield improvement through robust process system towards stable and predictable environments

◦ Drive improvement thru error-proof or poka-yoke and minimize human dependence

◦ Fast, precise and reliable problem solving and disposition.

◦ Update/review process specification to actual practices

◦ Eliminate causes of internal quality deviation.

◦ Support quality audit and improvement to meet customer expectation.

◦ Initiate and review process FMEA, OJTI, OCAP, PPC.

◦ Provide training to operators and enhance their skills.

◦ Support for FAR respond from customer



Your profile

You are best equipped for this task if you have:

• Bachelor in Mechanical/Electronic Engineering

• Minimum 2 years of experiences at EOL Mold/TF process as process engineer.

• Familiar with ASM 3G mold and ASM MPhenix TF machine is preferable

Experience:



#Posisi sebagai : Senior Engineer Test Equipment

Job description

In your new role you will:

• Installation and buy-off new ATE machine

• Define continues improvement on unscheduled & scheduled downtime for both Tester and Handler performance.

• Define continues improvement on cost down initiative without sacrificing product quality.

• Engage in day to day technical problem solving by providing thorough analysis for short term and permanent solution.

• To provide comprehensive data analysis for systematic improvement measure to close the gap on OEE target.

• Effective coordination and communication with technician and relevant parties from other functions in executing action plan.

• Define short term and long term overall improvement plan related to tester, handler, interface accessories and identify problems related with test package.

• Generate or enhance procedure for line sustaining and preventive maintenance.

• Bridging communication between technical operation team to test developer and OEM vendor on systematic issues.

• Lead technical team in debugging electronics issues.



Your profile

You are best equipped for this task if you have:

• Bachelor degree or Master degree in Electrical Engineering.

• In depth knowledge about Final Test Processes and corresponding KPIs (e.g. OEE, MTBF, MTBA, etc.).

• Advanced knowledge in Automated Test Equipment (e.g. Teradyne IntegraFlex / Microflex, A565) maintenance and troubleshooting.

• Able to use General-purpose test instruments such as oscilloscope, digital multimeter, power meter etc.

• Knowledgeable in basic operations of Gravity-Feed Handlers (e.g. Rasco1800, MT9928).

• Able to understand Loadboard schematic diagram and perform circuit analysis and troubleshooting.

• Knowledgeable in Teradyne Flex IGXL programming. Able to understand how the test program works and use software debugging tools to resolve test program issues and machine

failures.

• In depth knowledge about problem solving tools and methodologies (e.g. Six Sigma, 8D, fishbone analysis, FTA, etc.).

• Knowledgeable in SPC (Statistical Process Controls) tools and its application.

• Good communication skills. Able to clearly explain ideas and solution to problems to different groups and stakeholders.

• Strong data analysis skills.



#Posisi sebagai : EOL Equipment Engineer

Job description

In your new role you will:

• Establish procurement spec, Installation and buy-off new machine.

• Define continues improvement on unscheduled & scheduled downtime for both.

• Define continues improvement on cost down initiative without sacrificing product quality.

• Engage in day to day technical problem solving by providing thorough analysis for short term and permanent solution.

• To provide comprehensive data analysis for systematic improvement measure to close the gap on OEE target.

• Effective coordination and communication with technician and relevant parties from other functions in executing action plan.

• Define short term and long term overall improvement plan related to productivity and quality.

• Generate or enhance procedure for line sustaining and preventive maintenance.

• Bridging communication between technical operation team to OEM vendor on systematic issues.

• Lead technical team in resolving chronic issues



Your profile

You are best equipped for this task if you have:

• Bachelors degree Mechanical or Electrical Engineering.

• Having sufficient understanding in Equipment KPIs (e.g. OEE, MTBF, MTBA, etc.).

• At least 3 years of Hands on experience in Mold or/and Trim forming tooling and Equipment (e.g. FICO, ASM) maintenance and troubleshooting.

• In depth knowledge on equipment FMEA.

• In depth knowledge about problem solving tools and methodologies (e.g. Six Sigma, 8D, fishbone analysis, FTA, etc.).

• Knowledgeable in SPC (Statistical Process Controls) tools and its application.

• Strong data analysis skills.

• Good communication skills. Able to clearly explain ideas and solution to problems to different groups and stakeholders.



Pelaksanaan : 31 Januari 2019 s/d 1 Februari 2019

Profile Perusahaan : Infineon Technologies Batam, PT., Batam
Improving Life – improving energy efficiency, mobility and security Infineon Technologies focuses on these three challenges of a modern society Energy Efficiency: Improving efficiency in the generation, distribution and consumption of electricity, reducing carbon footprint and energy wastage Mobility: Making cars clean, safe and smart by reducing emissions, introducing advanced driver assistance system, and innovative electric and hybrid solutions Security: Enhancing security of connected


Apply This!
Diterbitkan 9 bulan 2 minggu yang lalu


Komentar



Nama
Email
Komentar

16 + 31 =



Ribet? Anda tidak suka mengisi form begitu banyak diatas? Dapatkan kemudahan berkomentar dengan menjadi member!

Agenda

Berikan Umpan Balik